Crane Rigging
Expert crane rigging services for lifting and placing heavy loads in construction and industrial projects.
Get a Free QuoteCommon Deployments
- Mobile crane operations
- Critical lift planning
- Steel erection
- Precast concrete placement
- Tower crane assembly and disassembly
Critical Parameters
Our matching team reviews these project details to route your request to the right crews.
Lift Engineering
Load calculations, crane selection based on capacity charts, boom length, and radius requirements for your specific lift.
Site Preparation
Ground assessment, outrigger pad placement, swing radius clearance verification, and overhead obstruction mapping.
Rigging & Lift Execution
Certified operators execute the lift plan with qualified signal persons, load monitoring, and real-time communication protocols.
Post-Lift Verification
Load placement confirmation, rigging hardware inspection, and project documentation for compliance records.
Crane rigging is essential for any project that requires lifting and placing heavy loads at height or across distance. From setting steel on a new building to placing commercial HVAC units on a rooftop, professional crane rigging combines engineering precision with operational safety. All crane operations in our network comply with OSHA 29 CFR 1926 Subpart CC (Cranes and Derricks in Construction), the federal standard governing crane safety on construction sites.
Types of Crane Rigging Projects
Our network handles a wide range of crane rigging work: structural steel erection, precast panel placement, mechanical equipment setting, bridge beam installation, modular building and ADU placement, and industrial equipment lifts. Equipment selection follows the ASME B30 series of safety standards — specifically ASME B30.5 for mobile and crawler cranes, and ASME B30.3 for tower cranes — which define load rating requirements, inspection intervals, and operational procedures for each crane type.
Safety First Approach
Crane-related incidents remain a serious concern in construction. According to the Bureau of Labor Statistics Census of Fatal Occupational Injuries (CFOI), crane-related workplace fatalities averaged 42 per year between 2011 and 2017, with 43% occurring in the private construction industry. Proper lift planning and rigorous adherence to safety standards are the most effective way to prevent these incidents.
Every crane operation in our network follows a documented lift plan reviewed by a qualified person, as required by OSHA 29 CFR 1926 Subpart CC. For lifts exceeding 75% of rated capacity, see our critical lift planning guide for the complete process. Standard lift planning includes:
- Ground condition verification per OSHA 29 CFR 1926.1402, which requires that the ground be firm, drained, and graded to meet the equipment manufacturer’s specifications for adequate support and levelness before any crane is assembled or used.
- Crane capacity verification at the planned operating radius, accounting for boom length, load weight, and environmental factors such as wind per OSHA 29 CFR 1926.1417.
- Certified operators who meet the three-part qualification standard under OSHA 29 CFR 1926.1427: training, certification by an accredited testing organization (such as NCCCO), and employer evaluation on the specific equipment being used.
- Qualified signal persons who meet the requirements of OSHA 29 CFR 1926.1428, including knowledge of standard hand signals and understanding of crane dynamics involved in swinging, raising, lowering, and stopping loads.
- Pre-lift safety meetings with all personnel involved in the operation, covering roles, communication protocols, and emergency procedures.
Operational FAQ
What types of cranes are available for rigging projects?
Our network includes operators with mobile hydraulic cranes, crawler cranes, rough terrain cranes, and tower cranes. Mobile and crawler cranes are governed by ASME B30.5 (Mobile and Locomotive Cranes) and tower cranes by ASME B30.3 (Tower Cranes). The right crane is selected based on lift weight, reach requirements, and site conditions.
What is a critical lift?
A critical lift is any lift exceeding 75% of the crane's rated capacity, involving hazardous materials, passing over occupied areas, or requiring multiple cranes (per OSHA 29 CFR 1926.1432). Critical lifts require a detailed engineered lift plan, additional safety protocols, and review by a qualified person as defined in OSHA's Subpart CC standards.
Do you handle permits for crane operations?
Our matched contractors manage all required permits including street closure permits, FAA notifications under 14 CFR Part 77 for crane operations exceeding 200 feet above ground level (filed via FAA Form 7460-1 at least 45 days before the lift), and local crane operation permits specific to your project location.
What certifications do your crane operators hold?
Crane operators in our network hold certifications from accredited programs such as the National Commission for the Certification of Crane Operators (NCCCO), as required by OSHA 29 CFR 1926.1427. This standard mandates that operators be trained, certified by an accredited testing organization, and evaluated by their employer on the specific equipment they will operate. NCCCO certification requires passing both written and practical examinations and must be renewed every five years.
Common Questions
Start Your Project
Submit your crane rigging project details for a free quote.
Get a Free QuoteZero Obligation. 100% Free.